Polar Guide Shaft - Pull Arm 90 EL, 92 CE & 92 EMC - GS 348

Guide shaft or guide rod for the center of the pull arm on Polar 90 EL, Polar 90 CE, Polar 92 CE and Polar 92 EMC paper cutters. (221167, 221911, GS 348) (Does not fit 92 EMC II cutters.)

This 11mm diameter alignment rod fits up through the center of the pull arm to prevent it from flapping around and causing damage when the shear bolts break. It is made from centerless ground drill rod for maximum toughness. Overall length is approximately 11" long.

This rod uses a set screw for mounting in the lower arm. Some of the 92CE cutters used a roll pin, not a set screw.